Jewellery Making Machines

The word jewellery stands for decorative items worn for personal adornments, such as brooches, rings, necklaces, earrings, pendants, bracelets and cufflinks. It is usually made from precious minerals such as gold, silver, diamonds and emeralds. There are several ways to produce the jewelry. Each method has its own machine; this article will explain some of these machines. It is possible to examine jewelry making machines under 4 main headings. These are polishing machines, workbenches, finishing machines and others.

Creating a smooth and shiny surface by rubbing the material or by applying a chemical treatment is called polishing. In jewellery making, there are some automatic polisher robots for this process. They can polishes the round products such as rings and bracelets and they have several brush stations for simulating every movement that can be done by the human hand. Another essential equipment is workbenches. They were developed to minimize losses and clamp workpieces of a wide range of different materials. Some models have controlled vacuum generators to save energy and reduce noise. The grinding process is also an important step for jewellery making. It is a type of machining using an abrasive wheel as the cutting mines. A smooth surface can be achieved with this process. Water jet units are usually stainless steel machines that can remove materials from the surface of the workpiece. With this high pressure water, it breaks the plaster after casting. Another important equipment is ultrasonic cleaners. Ultrasonic cleaning is a process that uses ultrasound to agitate a fluid. These agitations create microscopic bubbles implode with such force that contaminants adhering to surfaces are dislodged. Due to parts cleaning by hand is very time consuming, tedious, and ineffective; ultrasonic cleaning is a good method for it. Other equipment is called Rhodium Plating Machine. It involves plating jewelry with rhodium because this mineral has a strong surface that protects against scratches while offering a white reflective appearance. Rhodium plating machine uses electroplating to plate rhodium on to the base metal. Another machine of jewellery making is lapping machines. They are type of precision finishing machine. Lapping is a loose abrasive machining process, the abrasive action comes from a slurry-abrasive particles mixed with oil or water. Lapping machines create truly flat surfaces up to 0.001mm. These machines should be used whenever absolute flatness, parallelism, or surface finish is needed. Another example of a finishing machine is Magnetic Finishers. Magnetic finishers are one of the easiest ways to finish and burnish any non-ferrous metals. With stainless steel pins as small as Ø0.30mm in diameter and Ø5.00mm in length, they are able to work in areas such as undercuts, recesses and slots. Vibratory machines are also used for deburring and polishing the surfaces of all metal and non-metal materials. Drier machines have a critical role in the drying process is completed quickly without the water stain. They generally use hot air and saw dust for achieving well shine surfaced. Finally, small but precious minerals such as gold can be attached to people’s hands and may cause a big amount of financial damage. To prevent this loss, one should use a special handwash unit. These units can capture precious mines through filter systems and waiting tanks.

As Proses Makina Company, we design and manufacture Bombing Machines, Fume Hoods, Decanter Centrifuge Machines and Gold Refining Machines with years of experience. By producing environmentally friendly recycling and refining systems, we hope to leave a better and sustainable life for future.